Download the official stock firmware file for your Tecno F2 and fix system errors like a boot loop. The provided firmware files on this page can be flashed using SP Flash tool. This stock rom can fix issues like; frp lock, forgotten pin/pattern/passcode.

This stock rom can fix issues like; frp lock, forgotten pin/pattern/passcode. Below you will find firmware files for different Tecno F2 builds. Make sure to download the one which corresponds to your device build before flashing.
DEVICE SPECS
- Platform: Android 8.0 Oreo (Go Edition)
- Processor: Quad-core MediaTek MT6580A
- GPU: Mali-400 MP2
- Memory: 1GB
- Colours: Black, Gold, Blue and Red
- Body Dimension: 145 x 74.2 x 9.7 mm
- SIM Type: Micro Sim
- SIM Count: Dual Sim
- Display: 5.0-inch, IPS LCD capacitive touchscreen, 854 X 480 pixels
- Rear Camera: 5MP camera, 720p Video@30fps
- Rear Camera Features: -LED dual-tone, Geo-tagging, touch focus, face/smile detection, HDR, Panorama
- Push Emails: Yes
- Music Player: MP3/WAV/eAAC+/FLAC player
- Video Player: MP4/H.265 player
- FM Radio: Yes
- Loudspeaker: Yes
- 3.5mm Jack: Yes
- Navigation: Yes, with A-GPS, GPS
- Maps: Yes
- Proximity Sensor: Yes
- Video Streaming: Yes
- Active Noise Cancellation: Yes
- Image Editor: Yes
- Video Editor: Yes
- Document Viewer: Yes
- Document Editor: Yes
- Battery: 2, 400mAh removable Li-ion battery
- Front Camera: 2MP camera, 480p Video@30fps
- Built-in Storage: Yes
- Memory Card Support: Yes, up to 32GB
- 2G GSM: Yes
- 3G WCDMA: Yes
- GPRS: Yes
- EDGE: Yes
- 3G/WCDMA/HSPA: Yes
- HSPA+: Yes
- WLAN: Wi-Fi 802.11 a/b/g/n
- Wi-Fi Hotspot: Yes
- Bluetooth: Yes, v4.0 with A2DP
- USB Port: MicroUSB 2.0
- SMS/MMS: Yes
- Instant Messaging: Yes
What to note
- From the firmware links below, download only for your build
- Take a backup of your current system before flashing
- Flash with the latest version of SP flash tool
Requirements
- A Computer
- Android MTK USB drivers
- A USB cable
- Sp flash tool(link above)
How to flash
- Power off the phone, remove and reinsert the battery,
- Download and extract firmware for your build from the link below,
- Download sp flash tool and launch, then load firmware from the directory you extracted,
- Once the firmware is loaded, click the download button and connect the phone to PC via USB;
- Wait for flashing to complete
COMMENTS