SAMSUNG Galaxy S9/S9+ U6/BIT6/REV6 FRP/Google Lock Bypass without PC

Hello guys, today on this post, we are going to explain to you SAMSUNG Galaxy S9/S9+ U6/BIT6/REV6 FRP/Google Lock Bypass. And in this method, you won't be needing any computer. So, if you are having a Samsung Galaxy S9 or S9+ locked by frp, then this guide is for you. Follow the steps below carefully and bypass frp on your Samsung Galaxy S9/S9+ running Android 9.

Hello guys, today on this post, we are going to explain to you SAMSUNG Galaxy S9/S9+ U6/BIT6/REV6 FRP/Google Lock Bypass. And in this method, you won't be needing any computer. So, if you are having a Samsung Galaxy S9 or S9+ locked by frp, then this guide is for you. Follow the steps below carefully and bypass frp on your Samsung Galaxy S9/S9+ running Android 9.

FRP protection for Samsung devices isn't always that difficult to bypass. The key obstacle is to be able to gain access to the web browser. Unlike MTK or SPD devices where flashing to stock firmware helps bypass frp protection, Flashing has no effect on the frp lock state on Samsung devices

Requirements to bypass Samsung Galaxy S9/S9+ frp without PC

1. A WiFi connection
2. A SIM Card with a PIN lock enabled
3. FRP bypass apk
4. Google Account Manager 6 apk
5. And of course, a Google account of which you know the password

Note

The SIM card you use should be one which is PIN locked and not of any use to you because this procedure will require you to block the SIM permanently. That is, the SIM won't work again. So, make sure to use a new SIM card for this purpose.

SAMSUNG Galaxy S9/S9+ U6/BIT6/REV6 FRP/Google Lock Bypass without PC: Step-by-Step guide

As we said earlier above, make sure your SIM card is PIN locked and not your main SIM card. Now proceed with the FRP bypass as follows;

• Power on your FRP locked Samsung Galaxy S9 or S9+ and go through the setup Wizard. Accept all term and conditions and head to the connection screen.

• You will now need to connect to a WiFi network. So, connect to your WiFi and click on the Next button. The device will be verified and you will then be asked for the password or pattern lock. You can also choose to use the Google account. When you choose Google account option, you will then get on the screen asking you to connect to the Google account which was first synced on the device. 

• Since you do not know about the Google account on the device, head back to the welcome screen. Next, remove the SIM card tray and insert your PIN-locked SIM card. You will then be asked for the PIN code.

• Now you will need to enter wrong PIN codes. The essence of this step is to make the SIM card PUK-locked. Enter a wrong PIN code three(3) times until you get the message that the SIM is PUK-locked.

• The next thing you will need to do now is to enter the PUK code of the SIM card. You have to enter the wrong PUK code here as well. Every SIM card has 10 trials to reset PIN code after three wrong ones have been entered using the PUK code. So, you will be doing this 10 times.

[next]

• At each stage where you enter the wrong PUK code, you will need to enter a new PIN code. Just enter four(4) zeros. But since the PUK isn't the correct one, you will get a message which says "If you enter incorrect PUk 9 more times, SIM will be blocked". 

• Repeat the steps above 9 more times. That is, you enter the wrong PUK code and then set and new PIN 9 more times. At the last trial, you will immediately see the lock screen displayed with a notification saying you are not Signed in. Swipe on the notification to the left.

• When you swipe on the notice to the left, you should now see two icons; a settings icon and a notification bell icon. Click on the notification bell icon.

• Next, click on "Notification settings" on the notification tray that appears.

[next]

• On the next screen that displays, press and hold on "show all" until you get to another screen with Samsung Theme, Google Play and Android Setup. 

• Here on this screen, click on the dropdown menu at the top and select "All" by pressing on it until a list of apps appears. On this screen, scroll down and select YouTube.

• Again, on the next screen, scroll down and press hold "In-app notification settings" 

• You will now be taken to the Settings(In-app notification settings). From here, go to About >> Google Play Privacy. Once you press on Google play privacy, the Google Chrome browser will then open. Now the hard work is done, all that is left is to install the necessary frp bypass apps.

[next]

Now that you've gained access to the web browser, it is time to download and install all the necessary frp bypass apps. 

• Start by downloading and installing Google account Manager 6 from this link https://bit.ly/frp_google
• Next, download FRP Bypass apk from here https://bit.ly/frp_bypass. Install the app, launch it once installed and click on the three dots at the top-right corner then choose "Browser sign-in".

• Once in the browser, log-in with your Google account.

After a successful login, reboot your Android and then once it comes on again, remove the blocked SIM card. Go through the setup Wizard and configure your device. You won't be asked for Google account again.