We shared stock firmware/rom for the Wikoo Orange 400 a couple of days back. Today, we are going to share with you the stock firmware for Wikoo Orange 300. Both devices are some sort of a clone for the original Wiko. Wikoo Orange 300 & Wikoo Orange 400 are both MTK Android devices. The firmware file you are going to download from this page is in the scatter format. Firmware file was created from a backup using NCK Android MTK Dongle.
We shared stock firmware/rom for the Wikoo Orange 400 a couple of days back. Today, we are going to share with you the stock firmware for Wikoo Orange 300. Both devices are some sort of a clone for the original Wiko. Wikoo Orange 300 & Wikoo Orange 400 are both MTK Android devices. The firmware file you are going to download from this page is in the scatter format. Firmware file was created from a backup using NCK Android MTK Dongle.
In order to flash this firmware file, you will need to install Android MTK drivers on your computer. You can flash the firmware using any Android MTK flash tool, but we advise you flash using NCK Android MTK Dongle(NCK Pro Box).
Flash Wikoo Orange 300 stock firmware: The requirements
- A Computer
- Android MTK drivers
- SP Flash tool or NCK Dongle(MTK)
Wikoo Orange 300 firmware partitions detail
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [KINGSTON] KTN0403CS_TCR1
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 4096 SpareSize: 224 BMT Blocks 80
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM27)
Searching partiton table, wait..
[0]Part: PRELOADER Begin: 0x0 Len: 0x100000
[1]Part: PRO_INFO Begin: 0x100000 Len: 0x100000
[2]Part: NVRAM Begin: 0x200000 Len: 0x300000
[3]Part: PROTECT_F Begin: 0x500000 Len: 0x300000
[4]Part: PROTECT_S Begin: 0x800000 Len: 0x300000
[5]Part: SECCFG Begin: 0xb00000 Len: 0x40000
[6]Part: UBOOT Begin: 0xb40000 Len: 0x80000
[7]Part: BOOTIMG Begin: 0xbc0000 Len: 0x600000
[8]Part: RECOVERY Begin: 0x11c0000 Len: 0x600000
[9]Part: SEC_RO Begin: 0x17c0000 Len: 0x40000
[10]Part: MISC Begin: 0x1800000 Len: 0xc0000
[11]Part: LOGO Begin: 0x18c0000 Len: 0x100000
[12]Part: EXPDB Begin: 0x19c0000 Len: 0x200000
[13]Part: FAT Begin: 0x1bc0000 Len: 0x1400000
[14]Part: ANDROID Begin: 0x2fc0000 Len: 0x13b00000
[15]Part: CACHE Begin: 0x16ac0000 Len: 0x700000
[16]Part: USRDATA Begin: 0x171c0000 Len: 0x83c0000
[17]Part: BMTPOOL Begin: 0xffff0028 Len: 0x0
Offset: 0x1f554000 Count: 18
Detected partitions count: 18
Start dumping flash, this can take up to 1 hour.......
Start processing PRELOADER ......
Start processing PRO_INFO ......
Reading: BEGIN: 0x100000 - LEN: 0x100000
Start procesing NVRAM ......
Reading: BEGIN: 0x200000 - LEN: 0x300000
Start procesing UBOOT ......
Start processing BOOTIMG ......
Reading: BEGIN: 0xbc0000 - LEN: 0x600000
Start procesing RECOVERY ......
Reading: BEGIN: 0x11c0000 - LEN: 0x600000
Start procesing SEC_RO ......
Reading: BEGIN: 0x17c0000 - LEN: 0x40000
Start procesing LOGO ......
Backup FAT disabled, we will skip it...
Start processing ANDROID ......
Reading: BEGIN: 0x2fc0000 - LEN: 0x13b00000
COMMENTS